HP ProCurve 5400zl

■ logoff-period < 1 to 999999999 > -- Set period of time after which a client will be considered
removed from the port for a lack of activity. (NUMBER) (p. 36)
■ client-limit -- Set the maximum number of clients to allow on the port.(p. 31)
■ initialize -- Reinitialize the authenticator state machine.(p. 35)
■ reauthenticate -- Force re-authentication to happen.(p. 47)
■ clear-statistics -- Clear the authenticator statistics.(p. 31)
■ aaa port-access [ETHERNET] PORT-LIST
Manage general port security features on the device port(s).
Next Available Option:
■ controlled-direction < both | in > -- Configure how traffic is controlled on non-authenticated
ports; in BOTH directions (ingress+egress) or IN only (ingress). (NUMBER) (p. 32)
primary
■ aaa authentication console enable < local | tacacs | radius >
Specify the primary authentication method for access control.
Supported Values:
■ local -- Use local switch user/password database.
■ tacacs -- Use TACACS+ server.
■ radius -- Use RADIUS server.
Next Available Option:
■ secondary < local | none | authorized > -- Specify the backup authentication method for access
control.(p. 48)
■ aaa authentication console login < local | tacacs | radius >
Specify the primary authentication method for access control.
Supported Values:
■ local -- Use local switch user/password database.
■ tacacs -- Use TACACS+ server.
■ radius -- Use RADIUS server.
Next Available Option:
■ secondary < local | none | authorized > -- Specify the backup authentication method for access
control.(p. 48)
■ aaa authentication telnet enable < local | tacacs | radius >
Specify the primary authentication method for access control.
Supported Values:
■ local -- Use local switch user/password database.
■ tacacs -- Use TACACS+ server.
■ radius -- Use RADIUS server.
44© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide