num-attempts
â– aaa authentication num-attempts < 1 to 10 >
Usage: aaa authentication num-attempts <1-10>
Description: Specify the maximum number of login attempts
allowed. The default value is 3.
Range: < 1 to 10 >
NUMBER-OF-CLIENTS
â– aaa port-access authenticator [ETHERNET] PORT-LIST client-limit < 1 to 32 >
Set the maximum number of clients to allow on the port.
Range: < 1 to 32 >
page-path
â– aaa port-access web-based ewa-server IP-ADDR PAGE-PATH
Sets the path of the login pages to be found on the ewa server.
â– aaa port-access web-based ewa-server HOST-NAME PAGE-PATH
Sets the path of the login pages to be found on the ewa server.
periodic
â– aaa accounting update periodic < 1 to 525600 >
Usage: [no] aaa accounting update periodic <number>
Description: Conîš¿gure update accounting records mechanism.
Parameters:
periodic <number> - Send accounting update records at regular
intervals given by 'number' (in minutes).
Range: < 1 to 525600 >
port-access
â– aaa authentication port-access
Usage: aaa authentication port-access ...
Description: Conîš¿gure authentication mechanism used to control access
to the network. The conîš¿gured authentication method will.
be used to authenticate 802.1X (Port Based Network Access
Control Protocol) clients. The command should be followed
by a keyword identifying an authentication method
to use for Port Based Network Access Control Protocol clients
authentication. Use 'aaa authentication port-access ?'
to get a list of all available authentication methods.
Next Available Option:
â– primary < local | eap-radius | chap-radius > -- Specify the primary authentication method for
access control.(p. 44)
â– aaa port-access
42© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide
To Next Page
Loading...
Need help?
General