HP ProCurve 5400zl

max-vlans
OVERVIEW
VLANsCategory:
configPrimary context:
Related Commands
Usage: max-vlans <1-2048>
Description: Set the maximum number of VLANs on the switch.
The default is 256.
COMMAND STRUCTURE
EXAMPLES
Example: max-vlans NUMBER
Reconfigure the switch to allow 10 VLANs:
ProCurve(cong)# max-vlans 10
Command will take effect after saving conguration and reboot.
ProCurve(cong)# write memory
ProCurve(cong) boot
Device will be rebooted, do you want to continue [y/n]? y
374© 2009 Hewlett-Packard Development Company, L.P.