HP ProCurve 5400zl User Manual

Dr, or Backup).
- 'virtual-interface-state-change' signies the same change in the
state of a virtual OSPF interface.
- 'neighbor-state-change' signies that there has been a change in
the state of a non-virtual OSPF neighbor. This trap is generated
when the neighbor state regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way
or Full).
- 'virtual-neighbor-state-change' signies the same change in the
state of a virtual OSPF neighbor.
- 'interface-cong-error' signies that a packet has been received
on a non-virtual interface from a router whose conguration
parameters conict with this router's conguration parameters.
- 'virtual-interface-cong-error' signies the same condition on a
virtual interface.
- 'interface-authentication-failure' signies that a packet has
been received on a non-virtual interface from a router whose
authentication key or authentication type conicts with this
router's authentication key or authentication type.
- 'virtual-interface-authentication-failure' signies the same
condition on a virtual interface.
- 'interface-receive-bad-packet' signies that an OSPF packet has
been received on a non-virtual interface that cannot be parsed.
- 'virtual-interface-receive-bad-packet' signies the same
condition on a virtual interface.
- 'interface-retransmit-packet' signies than an OSPF packet has
been retransmitted on a non-virtual interface.
- 'virtual-interface-retransmit-packet' signies the same condition
on a virtual interface.
- 'originate-lsa' signies that a new LSA has been originated by
this router. This trap is not invoked for simple refreshes of
LSAs, but instead will only be invoked when an LSA is
(re)originated due to a topology change. Additionally, this trap
does not include LSAs that are being ushed because they have
expired.
- 'originate-maxage-lsa' signies that one of the LSA in the
router's link-state database has expired.
If 'all' is specied in place of a trap name then all the traps
are affected by the command.
Supported Values:
■ virtual-interface-state-change
■ neighbor-state-change
■ virtual-neighbor-state-change
■ interface-config-error
■ virtual-interface-config-error
■ interface-authentication-failure
■ virtual-interface-authentication-failure
■ interface-receive-bad-packet
■ virtual-interface-receive-bad-packet
■ interface-retransmit-packet
■ virtual-interface-retransmit-packet
■ originate-lsa
■ originate-maxage-lsa
■ interface-state-change
■ all
■ [no] router pim trap < neighbor-loss | hardware-mrt-full | software-mrt-full | ... >
490© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English