HP ProCurve 5400zl User Manual

Enables or disables the PVST protection feature on the port or range of ports specied.
The
command indicates which ports are not expected to receive any PVST BPDUs.
Default: Disabled on all ports
reset
■ spanning-tree pending reset
Copy active conguration to pending.
root-guard
■ [no] spanning-tree [ETHERNET] PORT-LIST root-guard
Set port to ignore superior BPDUs to prevent it from becoming Root Port.
tcn-guard
■ [no] spanning-tree [ETHERNET] PORT-LIST tcn-guard
Set port to stop propagating received topology changes notications
and topology changes to other ports.
trap
■ [no] spanning-tree trap < errant-bpdu >
Enable/disable STP traps.
Supported Values:
■ errant-bpdu
vlan
■ spanning-tree instance < 1 to 16 > vlan
Congure VLANs for the MST instance.
Next Available Option:
■ VLAN-ID-RANGE -- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)
(p. 653)
■ spanning-tree pending instance < 1 to 16 > vlan
Congure VLANs for the MST instance.
Next Available Option:
■ VLAN-ID-RANGE -- VLAN(s) to add to or to remove from the MST instance (VLAN-ID-RANGE)
(p. 653)
VLAN-ID-RANGE
■ [no] spanning-tree instance < 1 to 16 > vlan VLAN-ID-RANGE
VLAN(s) to add to or to remove from the MST instance
653© 2009 Hewlett-Packard Development Company, L.P.
spanning-treeCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English