OSPF authentication key (maximum 8 characters).
â– vlan VLAN-ID ip ospf all authentication-key
Set simple authentication method and key.
Next Available Option:
â– authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR) (p. 717)
â– vlan VLAN-ID ip ospf all authentication-key OCTET-STR
OSPF authentication key (maximum 8 characters).
â– [no] vlan VLAN-ID ip rip authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
â– auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR) (p. 719)
â– [no] vlan VLAN-ID ip rip IP-ADDR authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
â– auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR) (p. 719)
â– [no] vlan VLAN-ID ip rip all authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
â– auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR) (p. 719)
authentication-type
â– vlan VLAN-ID ip rip authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
â– none -- Do not use authentication.
â– text -- Use simple password.
â– vlan VLAN-ID ip rip IP-ADDR authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
â– none -- Do not use authentication.
â– text -- Use simple password.
â– vlan VLAN-ID ip rip all authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
718© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide