■ vlan VLAN-ID ip ospf IP-ADDR hello-interval < 1 to 65535 >
Set hello interval in seconds; the default is 10.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf all hello-interval < 1 to 65535 >
Set hello interval in seconds; the default is 10.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip pim-dense hello-interval < 5 to 300 >
Usage: ip pim-dense hello-interval <5-300>
Description: Set the frequency at which PIM Hello messages are transmitted
on this interface. Default value is 30 seconds.
Range: < 5 to 300 >
■ vlan VLAN-ID ip pim-sparse hello-interval < 5 to 300 >
Usage: ip pim-sparse hello-interval <5-300>
Description: Set the frequency at which PIM Hello messages are transmitted
on this interface. Default value is 30 seconds.
Range: < 5 to 300 >
helper-address
■ [no] vlan VLAN-ID ip helper-address IP-ADDR
Usage: [no] ip helper-address IP-ADDR
Description: Add or remove a DHCP server IP address for the VLAN. The
DHCP requests received by the switch on this VLAN are to
be relayed to the specied DHCP server.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
high-priority-forward
■ [no] vlan VLAN-ID ip igmp high-priority-forward
Usage: [no] ip igmp high-priority-forward
Description: Enable/disable the high priority forwarding of trafc for
subscribed IP Multicast groups. This feature is congured on
a per-VLAN basis.
holdtime
■ vlan VLAN-ID ip irdp holdtime < 4 to 9000 >
Usage: [no] ip irdp holdtime <4-9000>
Description: Set the lifetime (in seconds) of the router advertisements sent
on this interface. Must be no less than the maximum time
allowed between sending unsolicited router advertisements.
Range: < 4 to 9000 >
726© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
To Next Page
Loading...
