HP ProCurve 5400zl User Manual

■ XON/XOFF
■ None
inactivity-timer
■ console inactivity-timer < 0 | 1 | 5 | ... >
Usage: console inactivity-timer <0|1|5|10|15|20|30|60|120>
Description: Set the number of minutes of no activity detected on the
Console port before the switch terminates a communication
session. '0' means disable inactivity timer.
Default is 0.
Supported Values:
■ 0
■ 1
■ 5
■ 10
■ 15
■ 20
■ 30
■ 60
■ 120
local-terminal
■ console local-terminal < VT100 | NONE | ANSI >
Usage: console local-terminal <vt100|ansi|none>
Description: Set type of terminal being used for the current
console or telnet session (default is vt100).
Takes effect immediately. Not saved in conguration.
Terminal type options are:
vt100 = use VT100 terminal escape sequences.
ansi = use ANSI terminal escape sequences.
none = use a raw mode with no terminal escape sequences. Useful
for scripting.
See also 'console terminal help'.
Supported Values:
■ VT100 -- VT-100 terminal compatible.
■ NONE -- Raw mode with terminal escape sequences removed.
■ ANSI -- ANSI terminal compatible.
screen-refresh
■ console screen-refresh < 1 | 3 | 5 | ... >
Usage: console screen-refresh <1|3|5|10|20|30|45|60>
Description: Set default number of seconds before screen is refreshed
on the repeat command. See 'repeat help' for details on
the 'repeat' command.
Supported Values:
■ 1
94© 2009 Hewlett-Packard Development Company, L.P.
consoleCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English