HP StorageWorks 8/20q - Page 19

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 19
5=error 10=mark :
Trap1Version (1 / 2) :
Trap1Community (string, max=32 chars) :
SNMP Trap 2 Configuration - may optionally use 'set setup snmp trap 2' command.
Current Values:
Trap2Enabled False
Trap2Address 10.20.43.231
Trap2Port 162
Trap2Severity info
Trap2Version 2
Trap2Community public
New Value (press ENTER to not specify value, 'q' to quit) :
Trap2Enabled (True / False) :
Trap2Address (hostname, IPv4, or IPv6 Address) :
Trap2Port (decimal value, 1-65535) :
Trap2Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap2Version (1 / 2) :
Trap2Community (string, max=32 chars) :
SNMP Trap 3 Configuration - may optionally use 'set setup snmp trap 3' command.
Current Values:
Trap3Enabled False
Trap3Address 10.20.33.231
Trap3Port 162
Trap3Severity warning
Trap3Version 2
Trap3Community public
New Value (press ENTER to not specify value, 'q' to quit) :
Trap3Enabled (True / False) :
Trap3Address (hostname, IPv4, or IPv6 Address) :
Trap3Port (decimal value, 1-65535) :
Trap3Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap3Version (1 / 2) :
Trap3Community (string, max=32 chars) :
SNMP Trap 4 Configuration - may optionally use 'set setup snmp trap 4' command.
Current Values:
Trap4Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Version 2