To Next Page

To Previous Page

# Configure interface Serial 2/1/1 to borrow an IP address from GigabitEthernet 1/0/1.

[RouterB] interface serial 2/1/1

[RouterB-Serial2/1/1] ip address unnumbered interface gigabitethernet 1/0/1

[RouterB-Serial2/1/1] quit

# Configure a static route to the subnet attached to Router A, specifying Serial 2/1/1 as the

outgoing interface.

[RouterB] ip route-static 172.16.10.0 255.255.255.0 serial 2/1/1

Verifying the configuration

# Verify that a host attached to Router B can be pinged from Router A.

[RouterA] ping 172.16.20.2

Ping 172.16.20.2 (172.16.20.2): 56 data bytes, press CTRL_C to break

56 bytes from 172.16.20.2: icmp_seq=0 ttl=128 time=7.000 ms

56 bytes from 172.16.20.2: icmp_seq=1 ttl=128 time=2.000 ms

56 bytes from 172.16.20.2: icmp_seq=2 ttl=128 time=1.000 ms

56 bytes from 172.16.20.2: icmp_seq=3 ttl=128 time=1.000 ms

56 bytes from 172.16.20.2: icmp_seq=4 ttl=128 time=2.000 ms

--- Ping statistics for 172.16.20.2 ---

5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss

round-trip min/avg/max/std-dev = 1.000/2.600/7.000/2.245 ms

HPE FlexNetwork MSR Series Comware 7 Layer 3 - Ip Services Configuration Guides

Other manuals for HPE FlexNetwork MSR Series