HPE FlexNetwork MSR Series - Page 67

62
Examples
# Test the quality of the wireless link to the client with MAC address 60a4-4cda-eff0.
<Sysname> wlan link-test 60a4-4cda-eff0
Testing link to 60a4-4cda-eff0. Press CTRL + C to break.
Link Status
-----------------------------------------------------------------------
MAC address: 60a4-4cda-eff0
-----------------------------------------------------------------------
VHT-MCS Rate(Mbps) TxCnt RxCnt RSSI Retries RTT(ms)
-----------------------------------------------------------------------
NSS = 1
-----------------------------------------------------------------------
0 32.5 5 5 54 0 0
1 65 5 5 51 0 0
2 97.5 5 5 49 0 0
3 130 5 5 47 0 0
4 195 5 5 45 0 0
5 260 5 5 45 0 0
6 292.5 5 5 44 0 0
7 325 5 5 44 0 0
8 390 5 5 44 0 0
9 433.3 5 5 43 0 0
-----------------------------------------------------------------------
NSS = 2
-----------------------------------------------------------------------
0 65 5 5 44 0 0
1 130 5 5 44 0 0
2 195 5 5 44 0 0
3 260 5 5 44 0 0
4 390 5 5 44 0 0
5 520 5 5 44 0 0
6 585 5 5 43 0 0
7 650 5 5 43 0 0
8 780 5 5 43 0 0
9 866.7 5 5 43 0 0
Table 9 Command output
Field Description
No./MCS/VHT-MCS
• No.—Rate number for link quality test on 802.11a, 802.11b, or
802.11g clients.
• MCS—MCS index for link quality test on 802.11n clients.
• VHT-MCS—VHT-MCS index for link quality test on 802.11ac clients.
Rate(Mbps) Rate at which the AP sends wireless link quality detection frames.
TxCnt Number of wireless link quality detection frames sent by the AP.
RxCnt Number of responses received by the AP.
RSSI RSSI of the client detected by the AP.