224
1 to 32 characters. If you do not specify an event, this command displays information about all events
and event actions.
Examples
# Display information about the event with the owner owner2 and name eventA and the event
actions.
<Sysname> display snmp mib event event owner owner2 name eventA
Event entry eventA owned by owner2:
EvtComment : event is to set ifAdminStatus
EvtAction : Notification | Set
EvtEnabled : true
Notification entry:
NotifyOID : 1.3.6.1.2.1.88.2.0.1<mteTriggerFired>
NotifyObjOwner : N/A
NotifyObjName : N/A
Set entry:
SetObj : 1.3.6.1.2.1.2.2.1.7<ifAdminStatus>
SetObjWildcard : true
SetValue : 2
SetTargetTag : N/A
SetContextName : context1
SetContextNameWildcard : false
Table 51 Command output
Event entry
EvtComment Description for the event.
EvtAction
Event actions:
• Set action.
• Notification action.
EvtEnabled
Event status:
• Enabled.
• Disabled.
Notification entry
NotifyOID Notification OID.
NotifyObjOwner Owner of the notification-action object.
NotifyObjName Name of the object list to be added to the notification.
Set entry
SetObj OID of the set-action object.
SetObjWildcard
Wildcarding option for the OID:
• false—Specifies an object by its OID.
• true—Enables wildcard search for OIDs.
SetValue Value of the set-action object.
SetTargetTag Remote tag for the set-action object..
SetContextName Context for the set-action object.
To Next Page
Loading...
Need help?
General
