227
Predefined user roles
network-admin
network-operator
Parameters
owner trigger-owner name trigger name: Specifies a trigger by its owner and name. The
trigger-owner argument must be an existing SNMPv3 user. The trigger-name argument is
case-sensitive string of 1 to 32 characters. If you do not specify a trigger, this command displays
information about all triggers and trigger tests.
Examples
# Display information about the trigger with the owner owner1 and the name triggerA and the trigger
tests.
<Sysname> display snmp mib event trigger owner owner1 name triggerA
Trigger entry triggerA owned by owner1:
TriggerComment : triggerA is to monitor the state of the interface
TriggerTest : existence | boolean | threshold
TriggerSampleType : absoluteValue
TriggerValueID : 1.3.6.1.2.1.2.2.1.7.3<ifAdminStatus.3>
TriggerValueIDWildcard : false
TriggerTargetTag : N/A
TriggerContextName : context1
TriggerContextNameWildcard : true
TriggerFrequency(in seconds): 600
TriggerObjOwner : owner1
TriggerObjName : obj1
TriggerEnabled : true
Existence entry:
ExiTest : present | absent
ExiStartUp : present | absent
ExiObjOwner : owner1
ExiObjName : object1
ExiEvtOwner : owner1
ExiEvtName : event1
Boolean entry:
BoolCmp : unequal
BoolValue : 1
BoolStartUp : true
BoolObjOwner : owner1
BoolObjName : Objects1
BoolEvtOwner : N/A
BoolEvtName : N/A
Threshold entry:
ThresStartUp : falling
ThresRising : 40
ThresFalling : 20
ThresDeltaRising : 40
ThresDeltaFalling : 20
ThresObjOwner : N/A
ThresObjName : N/A
To Next Page
Loading...
