HPE FlexNetwork MSR3012 User Manual

274
Periodic inform : Disabled
Inform interval : 600s
Inform time : None
Wait timeout : 30s
Connection retries : Unlimited
Source IP interface : None
STUN state : Disabled
SSL policy name : Null
Table 56 Command output
Field
Description
CWMP state
Status of CWMP:
Enabled
or
Disabled
.
ACS URL
Preferred ACS URL.
This field displays
Null
if no preferred ACS URL has been specified.
ACS username
Username for the CPE to authenticate to the ACS. This field displays
Null
if
no username has been configured for authentication to the preferred ACS
URL.
ACS default URL
Default ACS URL.
The CPE attempts to connect to the default ACS URL if no ACS URL has
been assigned to it through the
cwmp acs url
command, ACS, or DHCP.
This field displays
Null
if no default ACS URL has been configured.
ACS default username
Username for the CPE to authenticate to the default ACS URL.
This field displays
Null
if no username has been configured for authentication
to the default ACS URL.
Periodic inform
Status of the periodic Inform feature:
Enabled
or
Disabled
.
Inform interval Periodic Inform interval. The default interval is 600 seconds.
Inform time
Date and time at which an Inform message is scheduled to be sent. If you do
not schedule an Inform sending, this field displays
None
.
Wait timeout
Close-wait timer. This timer is configurable with the
cwmp cpe wait timeout
command.
Connection retries
Number of attempts the CPE can make to retry a failed CWMP connection.
This field displays
Unlimited
if the default setting is used. The CPE retries a
failed session until the session is established with the ACS.
Source IP interface
IP address of the specified CWMP connection interface. This field displays
None
if you have not specified a CWMP connection interface.
STUN state
Status of NAT traversal for CWMP:
Enabled
or
Disabled
.
For the connection request initiated from the ACS to reach the CPE, you must
enable NAT traversal when a NAT gateway resides between the CPE and the
ACS.
SSL policy name
SSL client policy specified for the CPE to authenticate
the ACS for
establishing an HTTPS connection
. You must specify an SSL client policy
when HTTPS is used.
This field displays
Null
if you have not specified an SSL client policy.
Related commands
display cwmp status

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English