309
display kernel deadloop configuration
Distributed devices in standalone mode/centralized devices in IRF mode:
display kernel deadloop configuration [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display kernel deadloop configuration [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command displays kernel thread deadloop detection configuration for the active MPU. (Distributed
devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays kernel thread deadloop detection configuration for the master device.
(Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command displays kernel thread deadloop detection configuration for the
global active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Examples
# Display kernel thread deadloop detection configuration.
<Sysname> display kernel deadloop configuration
Thread dead loop detection: Enabled
Dead loop timer (in seconds): 60
Threads excluded from monitoring: 1
TID: 15 Name: co0
Table 65 Command output
Dead loop timer (in seconds): n
Time interval (in seconds) to identify a kernel thread deadloop. A
kernel thread deadloop occurs if a kernel thread runs more than n
seconds.
Threads excluded from monitoring
Kernel threads excluded from kernel thread deadloop detection. This
field appears only if the
monitor kernel deadloop exclude-thread
command is configured.
Name Kernel thread name.
TID Kernel thread number.
No thread is excluded from
monitoring
All kernel threads are monitored by kernel thread deadloop detection.
To Next Page
Loading...
Need help?
General
