33
Packets out of sequence: 0
Packets arrived late: 0
Path-Jitter Results:
Jitter number: 9
Min/Max/Average jitter: 0/0/0
Positive jitter number: 0
Min/Max/Average positive jitter: 0/0/0
Sum/Square-Sum positive jitter: 0/0
Negative jitter number: 0
Min/Max/Average negative jitter: 0/0/0
Sum/Square-Sum negative jitter: 0/0
Table 10 Command output
No. Statistics group ID.
Start time Time when the operation started.
Life time Duration of the operation in seconds.
Send operation times Number of probe packets sent.
Receive response times Number of response packets received.
Min/Max/Average round trip time Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time Square sum of round-trip time.
Packet loss ratio Average packet loss ratio.
Failures due to timeout Number of timeout occurrences in an operation.
Failures due to disconnect Number of disconnections by the peer.
Failures due to no connection Number of failures to connect with the peer.
Failures due to internal error Number of failures due to internal errors.
Failures due to other errors Failures due to other errors.
Packets out of sequence Number of failures due to out-of-sequence packets.
Packets arrived late Number of response packets received after a probe times out.
UDP-jitter results
UDP jitter operation results.
This field is available only for the UDP jitter operation.
ICMP-jitter results
ICMP jitter operation results.
This field is available only for the ICMP jitter operation.
Voice results
Voice operation results.
This field is available only for the voice operation.
RTT number Number of response packets received.
Min positive SD Minimum positive jitter from source to destination.
Min positive DS Minimum positive jitter from destination to source.
Max positive SD Maximum positive jitter from source to destination.
To Next Page
Loading...
