11. Install the system battery:
a. With the side of the battery showing the "+" sign facing up, insert the battery into the socket (callout 1).
b. Press the system battery down until it clicks into place (callout 2).
12. Do one of the following:
a. Install the air baffle.
b. Install the midplane drive cage.
13. Install the air baffle.
14. Install the access panel.
15. If removed, install the front bezel.
16. Install the server into the rack.
17. Connect all peripheral cables to the server.
18. Connect each power cord to the server.
To Next Page
Loading...
