Removing and replacing the GPU from the front GPU riser
cage
Removing and replacing the GPU riser
Removing and replacing the 12 E3.S drive backplane
Updated the Removing the system board assembly topic.
Added the following topics:
EDSFF SSD LED definitions
E3.S drive bay numbering
GPU configuration drive bay numbering
E3.S drive cabling
GPU cabling
GPU riser cabling
In the Front panel components topic:
Added images and tables for the following drive
configurations:
48 SFF drive configuration
24 E3.S drive configuration
36 E3.S drive configuration
GPU configuration
In the Rear panel components topic, added a table and rear panel
image with four power supplies.
In the System board components topic, changed the location of
the system maintenance switch.
In the Riser board components topic, added GPU riser.
In the Riser slot numbering topic, added GPU riser configuration.
In the SFF drive bay numbering topic, added 48 SFF drive
configuration.
In the Fan and heatsink requirements, updated the table to
include 48 SFF drive configuration, E3.S drive configuration, and
GPU configuration.
Added E3.S drive and GPU cabling to the following topics:
Cabling diagrams
Drive power cabling
Updated the OCP bandwidth upgrade cabling topic.
Part numberPart number Publication datePublication date EditionEdition Summary of changesSummary of changes
-
-
-
-
To Next Page
Loading...
