Setting Description
Current parallel surface scan
count
Controls how many controller surface
scans can operate in parallel:
• 1: Disabled
• 16: Maximum
No Battery Write Cache Enables or disables write cache when
the controller battery or capacitor is
not present or not completely charged.
Options are Enabled or Disabled
Physical Drive Write Cache
State
On controllers and drives that support
physical drive write cache, enable or
disable the write cache for all
configured or unconfigured drives that
are part of a configured logical drive
on the controller.
Rebuild priority Determines the urgency with which
the controller treats an internal
command to rebuild a failed logical
drive.
• Low: Normal system operations
take priority over a rebuild.
• Medium: Rebuilding occurs for half
of the time, and normal system
operations occur for the rest of the
time.
• Medium high: Rebuilding is given a
higher priority over normal system
operations.
• High: The rebuild takes
precedence over all other system
operations.
Shared memory features Enables or disables usage of reserved
memory regions to allow direct
assignment of device to guest virtual
machines.
Table Continued
26 System Utilities main menu options
To Next Page
Loading...
