HPE ProLiant Gen10

CAUTION: When you clear the controller configuration, all data on the attached media is no longer
accessible and cannot be recovered.
Procedure
1. From the System Utilities screen, select System Configuration > controller > Configure Controller
Settings > Clear Configuration.
2. In the Clear Configuration screen, select one or both of the following:
• Delete All Array Configurations—deletes all the arrays in the controller. All the data in the arrays
is also deleted.
• Delete RIS on All Physical Drives—deletes RAID metadata on the drives that are not part of the
array.
Viewing the backup power source status
Procedure
1. From the System Utilities screen, select System Configuration > controller > Configure Controller
Settings.
2. In the Backup Power Source screen, view the status of the backup power.
Status options are:
• Failed
• Not present
• Charging
• Charged
Managing power settings
The power management features do not apply to HPE Smart Array S100i SR Gen10 SW RAID.
Procedure
1. From the System Utilities screen, select System Configuration > controller > Configure Controller
Settings > Manage Power Settings.
2. In the Manage Power Settings screen, update any of the following settings.
System Utilities main menu options 29