Huawei SmartLogger3000 User Manual

Figure 6-41 Setting parameters for the built-in MBUS
Parameter Description
Built-in MBUS ● If the SmartLogger communicates with the solar
inverter using a built-in MBUS, set this parameter
to Enable.
● If only RS485 communication is used between the
SmartLogger and the solar inverter and third-party
device, set this parameter to Disable.
Device disconnection
time
Species the duration for determining device
disconnection.
● Set access parameters for an external MBUS.
– Method 1: Click Auto. Search to connect the MBUS.
– Method 2: Click Add Devices, set access parameters, and click Add
Devices.
Figure 6-42 Setting access parameters for an external MBUS
Parameter
Description
Device type Set this parameter to MBUS.
Port number Set this parameter to the serial number of the COM
port connected to the MBUS.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 115

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English