Huawei SmartLogger3000 - Setting ESU Parameters

Parameter Setting Description
Exhaust fan control After started, the exhaust fan will automatically stop in 1 hour. If a
combustible gas alarm is generated, the exhaust fan cannot be
stopped. The exhaust fan cannot be manually started after the re
response is triggered until the re alarm is cleared or 24 hours
later.
Fire Suppression
NO TE
Only the LUNA2000-2.0MWH Series Smart String ESS supports DC output power
distribution.
Parameter Setting Description
DC output distribution ● Starting up: Enable the DC output power distribution to supply
48 V DC power to the battery pack fan, BMU, and ESC
monitoring system.
● Stop: Disable the DC output power distribution to stop
supplying 48 V DC power to the battery pack fan, BMU, and ESC
monitoring system.
NO TE
Only the LUNA2000-200KWH Series Smart String ESS supports the temperature alarm
threshold settings.
Parameter
Setting Description
Temperature alarm
threshold
Species the temperature threshold for triggering a re alarm and
processing re response logic.
6.3.11 Setting ESU Parameters
This section does not apply to V300R001C00.
Procedure
Choose Monitoring > ESS > ESU > Running Param., set running parameters and
click Submit.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 162