Huawei SmartLogger3000 User Manual

Huawei NMS, conguring third-party NMS, and interworking with third-party
devices.
After the SmartModule communicates with the SmartLogger properly, the
SmartLogger automatically identies the SmartModule. The device name of the
SmartModule is Module(M1), and the corresponding port is M1. port.
Procedure
Step 1 Log in as user admin to access the deployment wizard page.
Step 2 Set parameters as prompted. For details, click Help on the page.
NO TE
During parameter setting, click Previous, Next, or Skip as required.
Figure 6-8 Deployment wizard
Step 3 After setting parameters, click Finish.
----End
6.2.3 Commissioning Using Deployment Wizard
(V800R021C10)
Context
The deployment wizard allows you to set basic SmartLogger parameters, connect
Huawei devices, power meters, and EMIs,
congure Smart PCS, Huawei NMS, and
third-part NMS, and implement interworking with third-party devices.
After the SmartModule communicates with the SmartLogger properly, the
SmartLogger automatically
identies the SmartModule. The device name of the
SmartModule is Module(M1), and the corresponding port is M1. port.
Procedure
Step 1 Log in to the WebUI and access the deployment wizard page.
Step 2 Set corresponding parameters as prompted. For details, see Help on the page.
NO TE
During parameter setting, click Previous, Next, or Skip as required.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 84

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English