Huawei SmartLogger3000 User Manual

8.14 How Do I Check the SIM Card Status?
Choose Over View > Mobile Data to view the SIM card status.
Table 8-3 SIM card status
Parameter Status Description
4G module
status
Card absent No SIM card is detected. Insert a SIM card.
Failed to
register the
card.
1. Check whether the SIM card account is in
arrears. If yes, top up the account.
2. Check whether the network quality is
poor. If yes, use a SIM card of another
carrier with good signal quality.
3. Check whether the SIM card has been
bound to another device. If yes, unbind
the SIM card from the device or replace
the SIM card.
● Not
connected
● The card is
in position.
The SmartLogger is trying to set up a dial-up
connection. Wait for the connection to be set
up.
Connected The dial-up connection is set up successfully.
Enter the PIN. The SIM card has been set to require a
personal identication number (PIN).
Contact the carrier of the SIM card for the
PIN, choose Settings > Wireless Network,
and enter the correct PIN.
Enter the PUK. If the number of incorrect PIN attempts
exceeds the upper limit, you need to enter
the PIN unblocking key (PUK). Contact the
carrier of the SIM card for the PUK. Choose
Settings > Wireless Network and enter the
correct PUK.
Trac status Normal The used trac does not exceed the monthly
trac package, and the remaining trac is
sucient.
Warning The used trac exceeds 80% of the monthly
trac package, and the remaining trac is
insucient.
Used up The used trac exceeds the monthly trac
package. Trac is used up. Top up the SIM
card account immediately.
SmartLogger3000
User Manual 8 FAQ
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 272

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English