Huawei SmartLogger3000 - Managing Licenses

Tab Function Operation Description
Inspection Check the health
status of the
inverter.
1. If Single Inspection is selected, select the
device to be inspected. If Batch
Inspection is selected, you do not need to
select a device.
2. Set Inspection type.
3. Click Start Inspection.
4. Observe the progress bar and wait until
the inspection is complete.
5. After the inspection is successful, click Log
archiving to download the inspection log.
Spot-check Start a spot-check.
NOTE
The spot-check
function is available
only for a device
whose grid code is
set to the Japanese
standard.
1. Select the device to be spot-checked.
2. Click Start Spot-Check.
3. Perform a spot-check test onsite.
4. After the spot-check test is complete, click
Stop Spot-Check.
Alarm Test Simulates an
inverter alarm.
NOTE
Only the
SUN2000-63KTL-
JPH0,
SUN2000-50KTL/
63KTL-JPM0, and
SUN2000-125KTL-
JPH0 support the
alarm test function.
1. Choose Device model > Device name to
select the device for which the alarm test
is to be performed.
2. Click an alarm name to deliver an alarm
command. The alarm icon is green by
default and turns red after the command
is delivered.
3. Click Clear Alarm to clear all alarms of
the SUN2000-63KTL-JPH0,
SUN2000-50KTL/63KTL-JPM0, and
SUN2000-125KTL-JPH0.
NOTE
After the alarm is cleared, the SmartLogger
collects alarm data again.
----End
7.4.6 Managing Licenses
Context
● The smart I-V curve diagnosis, smart PV string monitoring, smart tracking
algorithm, and smart reactive power compensation functions can be used
only after a license is purchased.
● The license les for smart I-V curve diagnosis and smart PV string monitoring
need to be stored in the solar inverter, and the license
les for smart tracking
algorithm and smart reactive power compensation need to be stored in the
SmartLogger. The matching between the SN of a device and a license is
unique.
SmartLogger3000
User Manual 7 Device Maintenance
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 248