Main Menu Second-Level Menu Third-Level
Menu
Function
Device List ● Modies device information.
● Imports or exports device
information.
Export Param. Exports device parameters.
Clear Alarm Clears device alarms.
Data Re-
collection
Re-collects historical performance
data and energy yield of devices.
Adjust total
energy yield
Adjusts the total energy yield.
Force Start Sends a force start command to all
devices in the array.
The third-level menu varies with the device model and grid code. The displayed menu may
vary.
6.2 Device Commissioning
Prerequisites
● Device and cable installation has been checked according to the specications
and requirements of PV and energy storage plants.
● Devices in the PV and energy storage plants and SmartLogger are powered
on.
● You have obtained the IP address of the SmartLogger as well as the user
name and password used for logging in to the WebUI.
Context
After installing or replacing a device or SmartLogger, you need to set device
parameters and add the device.
6.2.1 Preparations and WebUI Login
Prerequisites
● The operating system of Windows 7 or later is supported.
● Browser: Chrome 52, Firefox 58, or Internet Explorer 9, or a later version is
recommended.
● The SmartLogger allows a maximum of two users to log in to the WebUI at
the same time.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 80
To Next Page
Loading...
Need help?
General
