Procedure
Step 1 Congure a protocol information point le in .cfg format and import the le to
the SmartLogger.
Figure 6-60 Importing conguration
Step 2 Set access parameters and click Add Devices.
Figure 6-61 Setting access parameters
Parameter Description
Device Type The value can be Custom Device 1 to Custom Device
10.
Select a value based on the imported conguration
le. For example, if modbus_equip_custom_1.cfg is
imported, select Custom Device 1.
Port number Set this parameter to the number of the COM port
connected to the custom device.
Address Set this parameter to the communications address of
the custom device.
Step 3 Set device monitoring parameters and click Submit.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 184
To Next Page
Loading...
