Huawei SmartLogger3000 User Manual

Parameter Description
Send address Set this parameter to the email address for sending
emails.
Receive address N
NOTE
N is 1, 2, 3, 4, or 5.
Set this parameter to the email address for receiving
emails.
Yield Species whether to send energy yield data by email
and the time for sending emails.
Alarms Species whether to send alarms by email and the
severity of the alarms to be sent.
NO TE
You can click Send test mail to check whether the SmartLogger can successfully send emails to
users.
----End
Troubleshooting
NO TICE
If the error code is not listed in the following table, provide SmartLogger run logs
and contact Huawei technical support.
Error Code
Troubleshooting Suggestion Error Code Troubleshooting Suggestion
0x2002 1. Check whether the DNS
server address is correctly
congured.
2. Check whether the domain
name and the IP address of
the SMTP server are
correct.
3. Check whether the network
communication between
the management system
and the DNS server is
normal.
0x2003 1. Try again later.
2. Check whether the domain
name and the IP address of
the SMTP server are correct.
SmartLogger3000
User Manual 8 FAQ
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 259

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English