Parameter Specications
USB port USB2.0
Power output port 1 PCS; DC output: 12 V, 0.1 A
Digital input (DI) port 4 PCS; supports only the access from relay
dry contacts
Digital output (DO) port 2 PCS; relay dry contact output ports,
supporting NO or NC contacts; supports
12 V, 0.5 A signal voltage
Analog input (AI) port 4 PCS; AI1: supports 0–10 V voltage
(passive); AI2–AI4: support 4–20 mA or 0–
20 mA input current (passive)
4G antenna port (4G) 1 PCS; SMA-K (external screw inner hole)
port, used with the antenna with the SMA-
J (internal screw inner pin) port
Wireless Communication
Parameter
Specications
4G/3G/2G The SmartLogger3000A01CN supports 2G,
3G, and 4G networks of China Mobile and
China Unicom as well as 4G networks of
China Telecom.
The following frequency bands are
supported:
● LTE FDD: B1, B3, B8
● LTE TDD: B38, B39, B40, B41
● WCDMA: B1, B5, B8, B9
● TD-SCDMA: B34, B39
● GSM: 900 MHz/1800 MHz
The SmartLogger3000A01EU and
SmartLogger3000A03EU support the
following frequency bands:
● LTE FDD: B1, B3, B5, B7, B8, B20
● LTE TDD: B38, B40, B41
● WCDMA: B1, B5, B8
● GSM: 900 MHz/1800 MHz
SmartLogger3000
User Manual 9 Technical Specications
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 278
To Next Page
Loading...
Need help?
General
