Huawei SmartLogger3000 - Page 299

Type of
Connected
Access
Management
Management
System Setting
Port No.
Open Port No.
of Router
(Firewall)
Remarks
27250 27250, 27251,
2122, 10000–
12000
Trac-saving port. This port is
recommended when the SmartLogger
connects to the management system in
wireless mode. The device performance
data is updated every 5 minutes.
● 27250 and 27251: used to query and
set data between the SmartLogger
and the management system.
● 2122 and 10000–12000: used to
upload and download data or
les
between the SmartLogger and the
management system using FTPS.
NO TE
● If a third-party management system connects to the SmartLogger over Modbus TCP, the
SmartLogger port No. is 502, which is used to query and set data between the
SmartLogger and the third-party management system.
● If a third-party management system connects to the SmartLogger over IEC104, the
SmartLogger port No. is 2404, which is used to query and set data between the
SmartLogger and the third-party management system.
● If the SmartLogger connects to a third-party FTP server over FTP, the common port No.
is 21, which is used to periodically upload performance data to the third-party FTP
server.
● If the SmartLogger connects to a third-party email server over SMTP, the common port
No. is 25, 465, or 587, which is used to send emails to the email server.
● If the SmartLogger connects to a third-party NTP server over NTP, the common port No.
is 123, which is used for time synchronization with the NTP server.
● If the SmartLogger connects to a remote output server of Japan Electric Power Company
over HTTPS, the common port No. is 443, which is used to synchronize the scheduling
table with the electric power company.
SmartLogger3000
User Manual C Port No. List
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 287