Huawei SmartLogger3000 User Manual

Indicators
Indicator Status Description
Running
indicator
(RUN)
Green o The SmartModule is not
powered on.
Blinking green slowly (on for
1s and then o for 1s)
The communication with the
SmartLogger is normal.
Blinking green fast (on for
0.125s and then o for 0.125s)
The communication with the
SmartLogger is interrupted.
Alarm/
Maintenance
indicator
(ALM)
Alarm status Red o No alarm is raised for the
SmartModule.
Blinking red
slowly (on for
1s and then
o for 4s)
The SmartModule is running
in non-encryption status.
Blinking red
fast (on for
0.5s and then
o for 0.5s)
The SmartModule digital
certicate is invalid.
Steady red Reserved.
Communications Ports
● GE ports: four Ethernet electrical ports. Connect the LAN port of the
SmartLogger to one GE port of the SmartModule using an Ethernet cable. The
SmartModule obtains an IP address from the DHCP server and automatically
registers with the SmartLogger. The SmartLogger can use all communications
ports of the SmartModule.
SmartLogger3000
User Manual 2 Product Overview
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 24

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English