Huawei SmartLogger3000 User Manual

Main Menu Second-Level Menu Third-Level
Menu
Function
Alarm Output N/A Sets the mapping between solar
inverter alarms and DO ports.
Smart Tracking
Algorithm
N/A Sets the parameters related to the
smart tracking algorithm.
Other Parameters N/A ● Enables or disables RS485 upgrade
rate adaptation.
● Enables or disables data
forwarding for unconnected
devices.
● Sets the IEC104 data push period.
● Enables or disables AI1 SPD alarm
detection.
● Enables or disables STS
overtemperature protection.
● Sets the reset control port of the
external router.
● Enables or disables mobile
network sharing.
● Sets a third-party server.
● Sets target network.
● Enables or disables SSH.
● Sets collection interval of the built-
in MBUS.
● Enables or disables no response
from disconnected devices.
● Enables or disables local
maintenance through WAN port.
● Sets battery log printout interval.
● Enables or disables load tracking.
● Enables or disables battery
backow protection.
● Sets maximum grid power during
battery discharge.
● Sets adjustment deadband.
● Enables or disables DER-AVM
access.
Maintenance
Firmware Upgrade N/A Upgrades the rmware of the
SmartLogger, solar inverter, MBUS, or
PID.
Product Information N/A Queries product information.
SmartLogger3000
User Manual 6 WebUI Operations
Issue 10 (2022-08-20) Copyright © Huawei Technologies Co., Ltd. 78

Huawei SmartLogger3000 Specifications

General

Brand	Huawei
Model	SmartLogger3000
Category	Data Loggers
Language	English