8-Way Stitches – Menu T
There are two different stitches, straight and reinforced
straight stitch, in the T menu. Touch the arrows to select one
of the pre-set sewing directions. To fine tune the direction of
the stitch, use the stitch width and stitch length controls.
Program these stitches alone or with decorative stitches from
other menus to create unique stitches or borders.
8-Way Stitches Exercise
1. Straight stitch right 2. Straight stitch left
Fabric: Woven medium and stabilizer.
Select: Woven medium on your JoyOS ADVISOR™ feature,
menu T - 8-way stitches.
Use: Thread your machine with embroidery thread on top
and bobbin thread in the bobbin. Use presser foot S and size
80 needle as recommended.
Sew:
1. Touch the program button.
2. Select stitch 1 in menu H - children stitches.
3. Select T menu and click 3 times on the straight stitch to
the right.
4. Select stitch 1 in menu H.
5. Select T menu and click 3 times on the straight stitch to
the right.
6. Select stitch 1 in menu H.
7. Select T menu and click 3 times on the straight stitch to
the left.
8. Select stitch 1 in menu H.
9. Select T menu and click 3 times on the straight stitch to
the left.
10. Touch OK to enter sewing mode again.
11. Place the fabric and stabilizer in position under the
presser foot. Press the foot control to lower the presser
foot and start sewing your programmed stitch.
Special Stitches For Optional Presser
Feet
Stitch menu P- specialty stitches, includes special stitches like
candlewicking and edge stitches. These techniques may
require special presser feet and accessories. This is indicated
by the optional presser foot icon on the screen.
Tip: Detailed information on the current selected stitch is shown in the
stitch information.
7 Sewing 103
To Next Page
Loading...
