EasyManua.ls Logo

Husqvarna VIKING Designer RUBY 90 - Mirroring

Husqvarna VIKING Designer RUBY 90
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tension too tight
If the bobbin thread is visible on the top side of the fabric,
the thread tension/thread portioning is too tight. Reduce the
thread tension/thread portioning.
Tension too loose
If the upper thread is visible on the back side of the fabric,
the thread tension/thread portioning is too loose. Increase
the thread tension/thread portioning.
For decorative stitches and buttonholes the upper thread
should be visible on the back side of the fabric.
Make a few tests on a scrap piece of the fabric you are going
to use and check the tension.
Mirroring
1. Mirror end to end
2. Mirror side to side
To mirror a stitch or stitch program lengthwise, touch the
mirror end to end button. To mirror a stitch or stitch
program sideways, touch the mirror side to side button.
Tip: Use the smart toolbox to open a shortcut for mirroring.
Note: Some stitches e.g. buttonholes cannot be mirrored.
7 Sewing 91

Table of Contents

Related product manuals