Create New Program
1. To create a new program, touch the program button to
open the program window.
Stitch menu Font menu
2. Touch the stitch menu or font menu to select the stitch
or a font you want to use.
Active position is highlighted
Step to previous stitch/step to next stitch
3. Insert stitches from file manager or the stitch menu.
The active position is shown with a cursor and the
stitch or letter is highlighted. Inserted stitches or letters
will be selected and placed at the cursor. Only the
selected stitch or letter can be adjusted. You can move
the cursor through the stitch program by using the step
to previous stitch/step to next stitch arrows.
Note: A straight line at the point of the arrows indicates go to
last/go to first stitch.
4. When the font menu is selected the keyboard is opened
automatically to write your text. Minimize the keyboard
by touching the top right corner to be able to access the
OK button.
5. Touch the OK button to load your program to sewing
mode.
Alternatively load your program by pressing down the
foot control or touch the start/stop button on your
machine. Touch cancel to undo your program and close
the program window.
To Edit a Created Program
If you want to edit an already loaded program in sewing
mode, touch the edit stitch program button and you will
enter the program window again. Alternatively, touch & hold
on the program to open the smart toolbox to access the edit
button. Make your adjustments and touch OK in the
program window to load it to sewing mode with your
adjustments. Touch the cancel button in program to undo.
10 Program 147
To Next Page
Loading...
