IAI X-SEL - Page 444

414
INTELLIGENT ACTUATOR
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
223 Attribute 11 of SIO
channel 2 opened to user
(standard mount)
00000000H 0H to
FFFFFFFF
H
224 Attribute 12 of SIO
channel 2 opened to user
(standard mount)
00000000H 0H to
FFFFFFFF
H
225
to
282
(For expansion) 0
283 Port number assigned to
input function selection
000
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 30, “Input function selection 000.”
* If a negative value is set, the function will be assigned to input port
No. 0.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
284 Port number assigned to
input function selection
001
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 31, “Input function selection 001.”
* If a negative value is set, the function will be assigned to input port
No. 1.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
285 Port number assigned to
input function selection
002
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 32, “Input function selection 002.”
* If a negative value is set, the function will be assigned to input port
No. 2.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
286 Port number assigned to
input function selection
003
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 33, “Input function selection 003.”
* If a negative value is set, the function will be assigned to input port
No. 3.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
287 Port number assigned to
input function selection
004
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 34, “Input function selection 004.”
* If a negative value is set, the function will be assigned to input port
No. 4.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
288 Port number assigned to
input function selection
005
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 35, “Input function selection 005.”
* If a negative value is set, the function will be assigned to input port
No. 5.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
289 Port number assigned to
input function selection
006
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 36, “Input function selection 006.”
* If a negative value is set, the function will be assigned to input port
No. 6.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
290 Port number assigned to
input function selection
007
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 37, “Input function selection 007.”
* If a negative value is set, the function will be assigned to input port
No. 7.
* If “Program number specified for program start” has been specified
for input function selection 007, specify in this parameter an input
port number whose LSB contains the next higher value to the LSB
of the program number specified for program start.
(Related information: I/O parameter No. 30, “Input function
selection 000”)
(Main application version 0.64 or later/F-ROM 32-Mbit version only)
291 Port number assigned to
input function selection
008
-1 -1 to 3999 Specify the port number to be assigned to the function of I/O
parameter No. 38, “Input function selection 008.”
* If a negative value is set, the function will be assigned to input port
No. 8.
* If “Program number specified for program start” has been specified
for input function selection 008, specify in this parameter an input
port number whose LSB contains the next higher value to the LSB
of the program number specified for program start.
(Main application version 0.64 or later/F-ROM 32-Mbit version only)