268 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
3. A window showing list of volumes currently mapped to the selected host cluster shows up
as shown in Figure 5-89.
Figure 5-89 Volumes mapped to host cluster
4. Click Add Volume Mappings, which brings up a window listing the volumes that you can
select to assign to a host cluster, as shown in Figure 5-90.
Figure 5-90 Volume list
Note: If there are no volumes mapped to the selected host cluster, the list will be empty.
To Next Page
Loading...
Need help?
General