538 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
10.Click Finish.
11.Check the result of this FlashCopy mapping in the Consistency Groups window, as shown
in Figure 10-49.
For each FlashCopy mapping relationship that you created, a mapping name is
automatically generated that starts with fcmapX where X is an available number. If
necessary, you can rename these mappings. For more information, see 10.4.11,
“Renaming FlashCopy mapping” on page 543.
Figure 10-49 Create FlashCopy mappings result
10.4.7 Showing related volumes
Complete the following steps to show related volumes for a specific FlashCopy mapping:
1. From main pane, click Copy Services → FlashCopy.
2. Select the volume (from the FlashCopy pane only) or the FlashCopy mapping that you
want to view in this Consistency Group, as shown in Figure 10-50.
Figure 10-50 Volumes
Tip: You can start FlashCopy from the IBM Spectrum Virtualize GUI. However, if you plan
to handle many FlashCopy mappings or Consistency Groups periodically, or at varying
times, creating a script by using the operating system shell CLI might be more convenient.
To Next Page
Loading...
Need help?
General