50 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
For more information, see Chapter 3, “Graphical user interface overview” on page 77.
After you complete the initial configuration that is described in 2.10, “Initial configuration” on
page 55, the IBM Storwize V5000 Gen2 System overview window opens, as shown in
Figure 2-12.
Figure 2-12 Setup wizard: Overview window
2.8.2 Command-line interface (CLI)
The command-line interface (CLI) is a flexible tool for system management that uses the
Secure Shell (SSH) protocol. A public/private SSH key pair is optional for SSH access. The
storage system can be managed by using the CLI, as shown in Example 2-1.
Example 2-1 System management by using the command-line interface
IBM_Storwize:ITSO-V5000:superuser>svcinfo lsenclosureslot
enclosure_id slot_id port_1_status port_2_status drive_present drive_id
1 1 online online yes 10
1 2 online online yes 11
1 3 online online yes 15
1 4 online online yes 16
1 5 online online yes 12
1 6 online online yes 4
1 7 online online yes 7
1 8 online online yes 8
1 9 online online yes 9
1 10 online online yes 5
1 11 online online yes 18
1 12 online online yes 14
1 13 online online yes 13
1 14 online online yes 2
1 15 online online yes 6
1 16 online online yes 3
1 17 online online yes 1
1 18 online online yes 0
1 19 online online yes 20
1 20 online online no
To Next Page
Loading...
Need help?
General