152 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
Figure 4-13 shows an example if no dependent volumes are detected for a specific drive. If a
dependent volume is identified, it will be listed within this panel. When you have volumes
listed as dependent you can also check volume saving and throttle by selecting the volume
and clicking Actions. Click Close to return to the Internal Storage panel.
Figure 4-13 Internal drive with no dependent volumes
Example 4-3 shows how to view dependent volumes for a specific drive by using the CLI.
Example 4-3 Command to view dependent virtual disks (VDisks) for a specific drive
lsdependentvdisks -drive driveID