188 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
If there are no volumes using extents from the array the deletion command runs immediately
without additional confirmation. If there are volumes using extents from the array, you are
prompted to confirm the action as shown in Figure 4-59. Click Yes to migrate the volumes or
No to cancel the deletion process.
Figure 4-59 MDisk deletion confirmation panel
Confirming the action starts the migration of the volumes to extents from other MDisks that
remain in the pool; after the action completes the array is removed from the storage pool and
deleted.
Drives
Selecting Drives shows information about the drives that are included in the array, as shown
in Figure 4-60.
Figure 4-60 Panel showing the drives that are members of an MDisk
Note: Ensure that you have enough available capacity remaining in the storage pool to
allocate the data being migrated from the removed array, otherwise the command fails.
To Next Page
Loading...
Need help?
General