Icom IC-7700

7-6
7
VOICE RECORDER FUNCTIONS
■ About digital Voice Recorder
The IC-7700 has digital voice memories, up to 4 mes-
sages for transmit, and up to 20 messages for re-
ceive.
Amaximummessagelengthof30secondscanbere-
corded into a receive memory (total message length
for all channels of up to 209 seconds) and a total mes-
sage length of up to 99 seconds can be recorded in
transmit memory.
The transmit memory is very convenient for repeated
CQandexchangetransmissionsincontests,aswell
as when making repeated calls during DX’peditions.
EXIT/SETREC PLAYF-1 F-2
q Select any mode.
wPush[VOICE]
F-2
to display voice recorder menu.
e Push [PLAY]
F-1
or [MIC REC]
F-2
to select the
desired memory channel screen, then record audio
or playback the contents as described below.
r Push
EXIT/SET
twicetoexitvoicerecorderscreen.
• About recording received audio and playing back the contents
• Example— When [REC] is pushed momentarily
• Playing back the all contents in a channel • Playing back the end of 5 sec.* in a channel
15 sec.
(default)
30 sec. (max.) Not playing back Play back (5 sec.; default)
3 sec.
Push momentarily
records the contents of
the previous 15 sec.*
When is pushed momentarily again within 15 sec.*
from the last operation, all the contents between
operations will be recorded.
*The recording time period can be changed with “Normal Rec Time” in voice set mode (p. 7-13).
*The playing back time period can be changed with
“Short Play Time” in voice set mode (p. 7-13).
NOTE: The contents will be recorded into an independent memory
channels automatically.
REC
REC
REC
REC
Push momentarily
REC
Push momentarily
REC
Push momentarily.
PLAY
Or, hold down for 1 sec.
PLAY
Push momentarily.
F-3
PLAY