Icom IC-7700

11-2
■ Time set mode
The IC-7700 has a built-in calendar and 24-hour clock
(accuracy ±75 seconds per month) with daily power
ON/OFF timer functions. Before operating these timer
functions, set the current date and time.
q Push
EXIT/SET
to close multi-function screen, if
necessary.
w Push [SET]
F-7
to select set mode menu screen.
e Push [TIME]
F-4
to select time set mode.
r Push [Y]
F-1
or [Z]
F-2
to select the desired item.
t Rotate the main dial to set or select the desired
value or condition.
y Push
EXIT/SET
toexittimesetmode.
Main dial
EXIT/SET
//
/
F-3
Ω ≈
F-5
EDIT SET
123 Symbol ABC abc
F-1
Ω
F-2
≈
F-4
DEF
11
CLOCK AND TIMERS
Date 2000
–
1
–
1 ( Sat )
Sets the date.
z
Push [ t u ]
F-3
to select between the year and
the month/day, then rotate the main dial to select
them.
 •Thedatesettingand“DATE-setPush[SET]”indica-
tors blink.
x Push [SET]
F-5
to set the date.
Time (Now) 1:23
Sets the local time.
z Rotate the main dial to set the local time.
 •Thetimesettingand“TIME-setPush[SET]”indica-
tors blink.
x Push [SET]
F-5
to set the time.
CLOCK2 Function ON
Turns the CLOCK2 indicator ON and OFF.
CLOCK2 is convenient to display UTC or other
country’s local time, etc.
•ON:TheCLOCK2indicatorisdisplayedbelow
the local time display.
•OFF:TheCLOCK2indicatordoesnotdisplay.
CLOCK2 Offset 0:00
Sets the desired off-set time period for CLOCK2 dis-
play within –24:00 to +24:00 in 5 minute steps.
•Holddown[DEF]
F-4
for 1 second to select the default
value.
CLOCK2 Name UTC
Sets the desired 3-character name for CLOCK2.
Capital letters, small letters, numerals, some sym-
bols (! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } |
_
~
@) and spaces can be used.
z
Push [EDIT]
F-5
to select the name edit condi-
tion.
 •Thecursorunderthe1stcharacterblinks.
x Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to se-
lect the character.
 •Push[ABC]or[abc]totogglecapitalandsmalllet-
ters.
 •Push[123]or[Symbol]totogglenumeralsandsym-
bols.
 •Push[t]
F-1
or [u]
F-2
for cursor movement.
•Push[DEL]
F-3
to delete the selected character.
 •Push[SPACE]
F-4
to input a space.
 •Pushingthetransceiver’skeypad,[0]–[9],canalso
enter numerals.
c Push
EXIT/SET
to set the name.