Icom IC-7700

7-8
7
VOICE RECORDER FUNCTIONS
■ Playing the recorded audio (continued)
D One-touch playing
The previously recorded audio in message 1 can be
played back without selecting voice recorder screen.
PLAY
➥ Push
PLAY
momentarily to play back the last 5
seconds of the previously recorded audio.
 •“
≈PLAY
” indicator appears.
 •Playbackisterminatedautomaticallyafter5seconds.
 •Theplaybacktimeperiodcanbesetinvoicesetmode.
(p. 7-13)
➥ Hold down
PLAY
for 1 second to playback all of the
previously recorded audio.
 •“
≈PLAY
” indicator appears.
 •Playbackisterminatedautomaticallywhenallofthere-
corded contents in the channel are played.
■ Protect the recorded contents
The protect function is available to protect the recorded
contents from accidental erasure, such as over-writing,
etc.
F-4
PROTECT
F-1
∫
F-2
√
q Push
EXIT/SET
several times to close a multi-
function screen, if necessary.
wPush[VOICE]
F-2
todisplaytheVoicerecorder
menu.
e Push [PLAY]
F-1
 to display theVoice recorder
screen.
•Previouslyselectedscreen,TXorRXmemory,isdis-
played. If the TX memory message (T1–T4) appears,
push [T/R]
F-7
to select RX memory message.
r Push [Y]
F-1
or [Z]
F-2
to select the desired
voice message.
t Push [PROTECT]
F-4
to turn the protect function
ON or OFF.
 •“ ” indicator appears when the contents is protected.
y Push
EXIT/SET
 twice to exit the voice recorder
menu.
■ Erasing the recorded contents
The recorded contents can be erased independently
by message.
F-5
CLR
F-1
∫
F-2
√
q Perform the steps q to e as “■ Protect the re-
corded contents” above.
w Push [Y]
F-1
or [Z]
F-2
to select the desired
voice message to be erased.
e Hold down [CLR]
F-5
for 1 second to erase the
contents.
 •Push[PROTECT]
F-4
to release the protection in ad-
vance if necessary.
r Push
EXIT/SET
 twice to exit the voice recorder
menu.