Icom IC-7700

4-8
D Memory keyer screen
Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using
the edit menu.
• Transmitting
–
EXIT/SET
CWTRANSMIT
F-1
M1
F-4
M4
F-5
–1
q During CW mode operation, push [KEYER]
F-3
to select memory keyer screen.
w Push
TRANSMIT
to set the transceiver to transmit,
or set the break-in function ON (p. 6-3).
e Push one of the function keys ([M1]
F-1
to [M4]
F-4
) to send the contents of the memory keyer.
 •Holdingdownafunctionkeyfor1secondrepeatedly
sends the contents; push any function key to cancel
the transmission.
•Thecontestserialnumbercounterisincrementedeach
time the contents are sent.
 •Push[–1]
F-5
to reduce the contest serial number
count by 1 before sending the contents of the memory
keyer to a station a second time.
For your information
WhenanexternalkeypadorUSBkeyboardis
connected, the programmed contents, M1—M4,
can be transmitted without selecting the memory
keyer screen.
See pages 2-6, 2-7, 12-16 and 12-17 for details.
r Push
EXIT/SET
twice to return to normal screen.
4
RECEIVE AND TRANSMIT
• Memory keyer screen