Icom IC-7700

7-13
7
VOICE RECORDER FUNCTIONS
■ Voice set mode
Sets the automatic monitor function, short play and
normal recording times for voice recorder.
Main dial
F-4
DEF
F-1
∫
F-2
√
EXIT/SET
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
wPush[VOICE]
F-2
todisplaytheVoicerecorder
menu.
e Push [SET]
F-7
to select voice set mode screen.
r Push [Y]
F-1
or [Z]
F-2
to select the desired
item.
y Rotate the main dial to set the desired condition or
value.
 •Holddown[DEF]
F-4
for 1 second to select the default
condition or value.
u Push
EXIT/SET
toexitthevoicesetmodescreen.
Voice 1st Menu VOICE-Root
Select VOICE-Root orVOICE-PLAY as the menu
thatappearsfirstafterpushing[VOICE]
F-2
.
•VOICE-Root :Thevoicemenuappearsfirst.
•VOICE-PLAY :EithertheRXorTXvoiceRecorder
screen appears first.
Auto Monitor ON
Turn on the automatic monitor function for recorded
audio contents transmission.
•ON :Monitorstransmitaudioautomaticallywhen
sending a recorded audio.
•OFF :Monitors transmit audio only when the
monitor function is in use.
Repeat Time 5s
Set the repeat interval for the voice repeat trans-
mission to between 1 and 15 seconds (in 1 second
steps).
The transceiver repeatedly transmits the recorded
voice audio at this interval.
Short Play Time 5s
Set the desired time period for one-touch playback
(when
PLAY
is pushed momentarily).
•3to10secondsin1secondstepscanbeset.
(default: 5 seconds)
Normal Rec Time 15s
Set the desired time period for one-touch recording
(when
REC
is pushed momentarily).
•5to30secondsin1secondstepscanbeset.
(default: 15 seconds)