EasyManua.ls Logo

Icom IC-7700

Icom IC-7700
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12-16
12
SET MODE
SSB/CW Synchronous Tuning
OFF
Selects the displayed frequency shift function from
ON and OFF. (default: OFF)
When this function is activated, the audio pitch or
tones of the received signal will remain the same
even when the operating mode is changed between
SSB and CW.
The amount of frequency shift may differ accord-
ing to the CW pitch setting.
•ON :Thedisplayedfrequencyshiftswhentheop-
erating mode is changed between SSB and
CW.
•OFF:Thedisplayedfrequencydoesnotshift.
CW Normal Side
LSB
Selects the side band used to receive CW in CW
normal mode. (default: LSB)
APF Type
SOFT
Select audio filter shape for APF from SOFT and
SHARP. (default: SOFT)
•SOFT :Soft filter shape makes distinguishing
noise and signals easier. The audio filter
width is related to the CW pitch setting.
•SHARP :Sharpfiltershaperejectsinterfering sig-
nals more aggressively.
External Keypad (VOICE)
OFF
Setstheexternalkeypadforvoicemessagetrans-
mission capability ON or OFF.
Seepage2-7fortheequivalentcircuitofanexternal
keypad and connection.
•ON :Pushingoneofexternalkeypadswitches,
transmits the desired voice message con-
tents during a phone mode operation.
Holding down a switch to repeatedly transmit
the desired memory contents.
•OFF:Externalkeypaddoesnotfunction.(default)
External Keypad (KEYER)
OFF
Setstheexternalkeypadforkeyermemorytrans-
mission capability ON or OFF.
Seepage2-7fortheequivalentcircuitofanexternal
keypad and connection.
•ON :Pushingoneofexternalkeypadswitches,
transmits the desired keyer memory contents
during CW mode operation.
Holding down a switch to repeatedly transmit
the desired memory contents.
•OFF:Externalkeypaddoesnotfunction.(default)
External Keypad (RTTY)
OFF
SetstheexternalkeypadforRTTYmemorytrans-
mission capability ON or OFF.
Only RTTY memory channels RT1, RT2, RT3 and
RT4canbetransmittedusingtheexternalkeypad.
Seepage2-7fortheequivalentcircuitofanexternal
keypad and connection.
•ON :IntheRTTYmode,andwhiletheRTTYde-
codescreenisactive,pushingoneoftheex-
ternal keypad switches transmits the desired
RTTY memory contents.
•OFF:Theexternalkeypaddoesnotfunction.
(default)
Other set mode (continued)

Table of Contents

Other manuals for Icom IC-7700

Related product manuals