4-12
D Keyer set mode (continued)
4
RECEIVE AND TRANSMIT
This item sets the paddle dot-dash polarity. •Normalandreversepolaritycanbeselected.
This item selects the keyer type for [ELEC-KEY]
connector on the front panel.
•ELEC-KEY,BUG-KEYandStraightkeycanbese-
lected. (default: ELEC-KEY)
This item allows you to set the microphone [UP]/[DN]
keys to be used as a paddle.
• ON : [UP]/[DN] switches can be used for CW.
• OFF : [UP]/[DN] switches cannot be used for CW.
NOTE: When “ON” is selected, the frequency and
memory channel cannot be changed using
the [UP]/[DN] switches.