Icom IC-7700 - Set Mode Overview and Operation

12-2
■ Set mode description
Set mode is used for programming infrequently
changed values or conditions of functions. The
IC-7700 has a level set mode, display set mode, time
set mode, accessory set mode, others set mode and
USB-Memory set menu.
D Set mode operation
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Push [SET]
F-7
to select set mode menu screen.
 •Holdingdown
EXIT/SET
for 1 second also selects set
mode menu screen.
ePush[LEVEL]
F-1
, [ACC]
F-2
, [DISP]
F-3
,
[TIME]
F-4
, [OTHERS]
F-5
or [USB]
F-7
to
enter the desired set mode.
r For level, accessory, display and Others set mode,
push [WIDE]
F-7
to toggle wide and normal
screen.
t Push [Y]
F-1
or [Z]
F-2
to select the desired
item, then rotate the main dial to adjust/select the
desired value or condition.
  •Pushing[t u]
F-3
operation may be necessary for
some items.
y Push
EXIT/SET
twicetoexitsetmode.
Main dial
F-1
LEVEL
F-2
ACC
F-5
OTHERS
EXIT/SET
F-3
DISP
F-4
TIME
F-7
USB
12
SET MODE