Icom IC-7700 - Firmware Update via PC and Network

16-6
■ Firmware update — PC
D Connections Connect the IC-7700 and the PC through a LAN
(Local Area Network) as follows.
*Purchased separately
to WAN
/Internet network
Ethernet cable*
(Patch cable)
to crossover port
• IP address setting example
Hub/Router*
IC-7700
(192.168.0.10)
PC1
(192.168.0.11)
PC2
(192.168.0.12)
IC-7700
192.168.0.10
255.255.255.0
IP address
Subnet mask
PC1
192.168.0.11
255.255.255.0
PC2
192.168.0.12
255.255.255.0
16
UPDATING THE FIRMWARE